|
|
|
|
|
|
|
|
|
||
|
|
|
| J.P. Environmental Products Inc. isolation bases are designed
to meet the needs of most industrial and commercial machine/ drive
mounting applications. All types can be supplied for isolator attachment
or for direct foundation bolting. Type BWS, BCI, and BSI bases
can also be used as structural assembly platforms for equipment
with independent mounted motors. When isolation bases are coupled
together with J. P. high efficiency isolators and mounts, equipment
can now be located in vibration sensitive areas not otherwise possible.
J. P. has established itself as a supplier of highly engineered silencing and isolation related products for industry. Our corporate philosophy of providing customers with the service they expect and the products they need, has made this possible. We guarantee this same level of service and product integrity in our BRC, BWS, BCI, and BSI.
|
||
| Base Alternatives
All isolation bases manufactured
by J. P. are individually engineered at time of order to meet
the specific structural and vibration control needs of the
application. Bases are designed to 'fit' the dimensions of
the equipment and the specified isolation or hold down requirements,
and are complete with all necessary mounting holes. Primed steel
finish is provided on every base. Special coating systems are available,
upon request. |
||
| BRC Isolation Rails and Channels:
represent the most economical way of supporting a self contained
machine/drive combination. BRC rails and channels are ideal
for matching of standard equipment with predefined site hold down
positions or for locating isolators/mounts at key load points.
Structural steel angle rails (for lighter units) and "C" channels
(for heavier units) provide the strength necessary to ensure total
rigidity.
|
||
| BWS Welded Steel Bases: for integration
of equipment with independently mounted motors up to Fr. No. 447T
and larger (direct or belt drive). All BWS bases utilize continuously
welded structural steel between 4" and 12" depending on static and
dynamic loading and the drive horsepower. During design, the machine
and motor torques are always taken into account to ensure proper
drive alignment.
|
||
| BCI Concrete Inertia Bases:
for applications where increased mass is required to reduce equipment/drive
vibration amplitude. BCI bases are supplied with "C" channel
concrete retaining outer members (minimum 6"), welded reinforcement
lattice (12" ctrs standard), and equipment mounting templates
welded to the outer members. The Type BCI base is the most economical
concrete inertia alternative.
|
||
| BSI Combination Steel/ Inertia Bases:
provide the rigid steel structure of the Type BWS base and the
inertial properties of the Type BCI base. Primarily for use
with heavy industrial equipment subject to high vibration, BSI combination
bases are supplied with continuously welded structural steel "C"
channel (minimum6"), welded reinforcement lattice (12"
ctrs standard), and are complete with a steel pan under the entire
base, for the pouring of concrete. Full height, drilled channels
are positioned under all equipment/drive hold down locations to
ensure structural integrity.
|
||
Standard Options Available:
Custom Bases: The selection of an appropriate base type, thickness, and inertial mass (if required), for a given application is dependent on:
The following tables can be applied to make initial base selections using a simplified set of criteria. Contact your J. P. representative for a detailed selection based on all factors specific to your application.
|
||
|
Contact Us: |
||
|
|
||
|
Providing Economically Sound Solution
|
|
|
© Copyright J.P. 2006 |
